1 Start De-dross normally open EVS loading hatch |
![](images/1.jpg) |
|
|
2 Place Dross direct from the solder pot into Chamber rather than Pail |
![](images/2.jpg) |
|
|
3 Press the Cycle Start Button |
![](images/3.jpg) |
|
|
4 The machine sqeezes the dross through the chamber teeth into the ingot tray |
![](images/4.jpg) |
|
|
5 At the end of the cycle the chamber door opens automatically |
![](images/5.jpg) |
|
|
6 Dross is emptied automatically into the dross pail
|
![](images/6.jpg) |
|
|
7 Take out the tray, place in a safe position and allow to cool |
![](images/7.jpg) |
|
|
8 Remove the ingots and place back into solder pot as needed |
![](images/8.jpg) |
|
|